Clearaudio Statement v2 Turntable

Clearaudio Statement v2 Turntable

The Statement v2 turntable is the only world-class super high-end turntable system in continuous production since 2005. The Statement V2 magnetically levitates its massive POM/stainless steel platter, accurately spinning it via its non-contact magnetic drive system while self-leveling the entire turntable with its integral pendulum gyroscopic base. At 770lb, it makes a visual statement and with the TT-1 tangential tonearm and Goldfinger Statement cartridge, it achieves the most entertaining, involving, and realistic reproduction of music from a vinyl LP.

The Statement V2’s complex stand is built from several levels of Panzerholz sandwiched between stainless steel plates and separated by stainless steel pillars. This massive construction supports the main turntable and pendulum to provide unparalleled isolation from both self-generated and outside vibrational energy. The uppermost level contains the sophisticated control electronics and control panel, a Real-time speed control and active blue LCD display and touch selection of start/stop/speed selection and fine pitch control.

At the top of the stand, a massive stainless-steel platform, comprised of two heavy plates laminated together with a high-performance damping material, houses the gyroscopic bearing. The 80kg pendulum "floats" in the gyroscopic bearing effectively self-leveling the entire upper turntable in conjunction with oil damping devices.

The Statement’s magnetic drive system isolates the stylus in the groove with its no contact, multiple platter drive system. The Drive platter is belt-driven by an ultra-low vibration motor, controlled by a built-in micro-processor that checks the speed 7,000 times each minute to ensure absolute speed stability. The Drive platter magnetically couples to the Driven platter using a ring of magnets, one in the top of the Drive platter and the second ring in the bottom of the Driven platter, with no actual contact between these 2 platters.

The Main platter is connected to the Driven platter by a special diamond-coated version of Clearaudio’s patented Ceramic Magnetic Bearing (CMB). The V2 Main platter is manufactured from POM (polyoxymethylene) and incorporate a stainless steel flywheel at its base for mass damping and ultimate speed stability. The top outmost edge of the Statement V2’s Main platter is machined to incorporate the Clearaudio Outer Limit stainless steel peripheral record clamp. This ensures that the record is completely coupled to the massive platter and flat.

The Statement record clamp, designed for the Statement V2 turntable, is made from Panzerholz and stainless steel. It features a special three-point contact with the record label, reducing vibrations generated from the stylus as the LP playback.

The Statement V2 system includes the Clearaudio TT-1 linear tracking tonearm and Goldfinger Statement cartridge. Two more pivoted tonearms such as our Universal 12” can be added.

Total weight is 350 kg (770 lbs.) and it is available in piano black lacquer or natural wood finishes, black or silver anodized aluminum, black POM, clear acrylic, and stainless steel

The new Clearaudio Statement v2 Turntable is the result of more than 28 years of research and development and includes the following features:

- Patented magnetic driven sub platter, absolutely no contact to the main platter
- Additional magnetic vertical platter bearing
- All platters are dynamic balanced
- Kardan turntable chassis suspension
- Automatic horizontal levelling device including the tonearm platforms (no air pump or compressor)
- 80 kg Pendulum weight for self levelling of the top platform
- High speed microprocessor controlled motor drive unit (as used in Mars Rover)
- Oil damping devices for the turntable main chassis
- Real time speed control and active blue LCD display
- Ergonomic fine speed adjustment (33-1/3, 45, 78 rpm.)
- Statement Turntable can accommodate up to four different tonearms
- Complete resonance control via damped sandwiched bullet proof wood (Panzer Holz), stainless steel and acrylic construction
- Total weight approx. 350 kg (770 pounds)
- Dimensions (metric): height – 125 cm, width – 69 cm, depth – 57 cm
- Dimensions (inches): height – 49.2", width – 27", depth – 22.5"