Quicksilver
Quicksilver KT Mono
Quicksilver KT Mono
Quicksilver KT Mono
The new KT Mono amp retains the high damping factor and low distortion of the Horn Mono but with enough power to handle inefficient and difficult to drive speakers. The amplifier accepts KT66, KT77, KT88, KT90, KT99, KT120, KT150, and KT170 power tubes and when ordered with KT150s will produce 100 watts. It also has low distortion all the way up to full power but at reduced power gives the efficiency, finesse and delicacy of a low powered amplifier.
This amplifiers is engineered to have a very wide bandwidth, extremely low distortion and superior dynamic range.
The output transformer used in this amplifier is based on the best designs of the past but uses superior new materials to achieve a very high level of performance. The high frequency characteristics of this transformer are very stable. Many different output tubes may be used without the need for circuit changes or compensation adjustments.
This is an all tube design and uses no circuit boards or transistors.
*Price shown is per pair of mono amplifiers*
| Power Output | 80 watts into 4 or 8 ohms |
| Power Bandwidth | 14 Hz to 70 KHz |
| Damping Factor | 20 |
| Input Sensitivity | 1.2 volts |
| Input Impedance | 100 Kohm |
| I.M. Distortion: | less than 0.5% at 80 watts |
| Tube Complement | two KT88, 1-12AX7, 1-12BH7 |
| Power Consumption | 100 watts at idle 240 watts at full power |
| Chassis | Black chassis
Chrome transformer covers |
| Dimensions | 6″H, 14.5″L, 9.25″W |
| Weight | 40 lbs. each |
| U.S. Warranty | 3 years parts and labor & 90 days for tubes |
